John Greviskis and Bert Delle take a look on how to change out a water pump and lower unit fluid on a Mercury outboard engine. Many tips are shown for this task as well as finding out where to get after market kits to complete this project.
In this half hour, John focuses on trailers… specifically how to search out and purchase used trailers. John will educate trailer boaters on when it is a smart idea when to recondition a used trailer for use, and when it is a total waste of time! A must see episode for those you are in need of a trailer.
John and Bert visit Birdsall Marine Design, one of the world’s leaders in T-Top and Tower design. In this episode, John shows how this company fabricates and installs this useful accessory for a boat.
Air Conditioning is a MUST in Florida for boats with a cuddy cabin. That’s why John and Bert explore the issue of air conditioning and how to install it on a 29′ Luhrs. Many COOL topics are discussed here including water cooled air conditioning units and internal strainers.
Perhaps one of the most overlooked important topics in boating… Your VHF Radio. In this show John and Bert will demonstrate how to properly select and install a VHF radio into the boat. Installation will include how to mount a radio so that it always within reach and protected from the elements.
In this informative episode, John and Bert search out the next Ship Shape TV project boat for use on the show. A variety of boats are looked at and, let’s face it, some of them are pretty rough looking. John teaches boaters what to look for when buying a boat that needs some work!
On an older boat originally built back in 1978, the steering system leans to the right when driving. So it is time to completely replace the steering cables and helm for this boat… and John and Bert will show you how!
When a boat is victim of an electric current in the water, electrolysis occurs causing major galvanic corrosion of metal on the boat… If this happens to frequently on a boat… Look Out… Sunken ship! In this half hour John explains the importance of installing a bonding system to a boat. He will go over sacrificial anodes, lightening protection, and the importance of a galvanic isolator.
On this episode,, John and Bert go over installing trim tabs on a Seahawk,. John looks at a pair of electric trim tabs at Boat Owners Warehouse. Then Bert will take boaters step by step on how to install those tabs.
With the new project boat in yard, Bert continues the process of checking for any way that the engine can be re-used. However the engine proves to be too corroded and Bert decides to completely remove it from the craft. While on the boat, John and Bert decide to remove traces of rotted wood in the bilge and under the carpet.
This episode of Ship Shape TV Deals with the installation of a tower on a 29′ Blackfin. John will show you how to pick out a tower that is right for your boat, how to measure it in your boat correctly, and finally how to put the boat accessory in.
In this informative episode of Ship Shape TV, John will be showing boaters how to install a marine canvas enclosure in order to protect the cock pit area from dirt… and provide decent shade. He also will be inviting a professional boat detailer to guide you through your bright work.
This episode dives into the aspect of installing a small outboard to an ACB. John will thoroughly go look into all the options for steering and controls.
Get yourself a paper and pencil and watch this amazing episode dealing with replacing corroded exhaust manifolds and risers on your engines.
John is unhappy with the plastic seating in his ACB project boat and will make some changes to it. In this half hour John looks into the different types of seating that are available for his boats and will show boaters how to install them into their crafts.
In this exciting episode of Ship Shape TV, John and Bert show boaters how to check their bilge pumps for leakage. They also look into what is new in bilge pumps and will take you step by step on how to install one.
This episode is packed with information about transmissions on large boats… specifically the Pleasure Lock Trolling System… which allows you to enhance your trolling speed at idle.
This half hour John takes a look at your controls on your boat and what to do when they are on the blink. Bert and john will look into new types of controls and, of course, show you how to replace your current set with new ones.
Many people think they may have many issues with their boat if the boat doesn’t have enough speed or cannot get up on plane fast enough… however it usually has to do with a prop that is not right for your boat. In this episode, John and Bert discuss the issue of choosing the proper propeller that is right for your boat!
On this show of Ship Shape TV, John will look into Davits, Marine Elevators, and cradle lifts.
A break in the action as John visits Defever Yachts and gets involved with their yearly rendezvous. Defever Yacht owners are visited and their will be a complete introspective into the luxury boat.
In this episode, john and Bert take a look into the GPS… How it works… the new models… and what to look for when purchasing one.
For you Big Vessel owners.. John will go over the procedure and importance of putting in a bow thruster.
John and Bert bring the excitement of the Miami International Boat Show to boaters and feature many new gadgets and technologies in boating.
Want to convert your engine and outdrive motor system into an outboard? How about an engine bracket? Well in this informative show, John will teach you how to completely convert your transom so an outboard motor and bracket are possible.
In part 2 of the 1978 Stamos Outdrive to outboard conversion process, the transom will now be filled in after the old outdrive boot left a gaping hole to be dealt with. A plywood core is made with fiberglass to be used as coring material.
In Part 3 of the Stamos engine conversion, John is going to install a plug that was made to fill in the transom where a gaping hole was made when the outdrive engine was removed. In this show, John will show you the different types of fiberglass that will be used, as well as the epoxy resin, when he demonstrates a fiberglass lay up.
In this Electrical episode, John and Nick share some unique tips on how boaters can do their own 12 -volt wiring on the boat. They will get into switches, ground blocks, and terminal blocks… making the boater’s wiring task as easy as pie.
After John’s project boat flipped on the highway, it loosened the gunwale cap. Now John has to repair that and after he is done sealing the repair with some 3M and trough bolts, it will be time to install some new rub rail!
On the Pursuit project boat, John and Nick need to repair a transom by removing blisters, and filling in any holes and cracks.. They need to finish this before they can move on to the meat of the show… installing a transom plate; which will increase the strength of the transom in order to add an additional engine eventually.
Nick and John will be visiting a manufacturing facility where they make Transom Brackets. Then afterwards, they will demonstrate how to actually hang one on to the boat. Get ready for an awesome show!
After installing a custom transom plate to the back of a project boat, John and Nick decide to look into installing some trim tabs. A great deal of time is spent on the proper measuring and placement of these actuating trim tabs… proper mounting is crucial here. Then, for a sporty look, John does a step by step instruction on how to give a boat a boot stripe.
After installing a brand new Fuel tank on a project, it is now time to get into fuel fill hose and vent hose. John will install these new hose and totally revamp the fuel system from the tank back to the engines. Then they will switch gears and install an isolated 3 battery system.
In this episode of Ship Shape TV, John compares the various products that make bright work easier on your boat. Then it’s all about the trailers as he re-carpets trailer bunks, installs guide poles, and introduces us to a Posi-latch.
In an effort to strengthen his boat with better core materials, John is switching out the wood in his bulkheads for composite material. He will also continue the work on a transom by tying up a couple of knees.
In this episode of Ship Shape TV, John, along with a guest, show boater’s the advantages of having air conditioning in their cabins. Many types of air conditioning units are discussed. Also demonstrated are ways to hook up shore power to your boat.
In this half hour, John will be hanging some new twin engines to the transom of a project. But that’s not it, cause he will introduce a hydraulic steering system made by Teleflex. He will show boaters how to install and bleed this system for use. Then he will install some new powder coated accessories to the boat… and if you don’t know about powder coating… then, never fear… John will take you to a factory that will explain it all!
We visit John at the Mercury Testing Facility where he is testing various props out to find out exactly what he wants for a pair of counter rotating engines on his 1982 Pursuit. A wide range of testing is done from speed to hole shot.
Getting water into your boat is what this episode is all about. This half hour John installs a fresh water system on the 1978 Stamos… then Johh will be installing a salt water wash down on another boat as well as learn how to actually make one! Then John will be installing a Galley Made mini 100 gallon per day water maker on 1966 Hatteras 34′ convertible.
In this episode of Ship Shape John brings in a professional detailer to discuss the proper ways to wash down your boat after its been in salt water. Find out what products work best, some tricks of the trade, how to remove mildew, as well as how to clean your isinglass.
This show is about marine electronics. John will show you a step by step procedure to mounting a GPS, VHF radio, and a fish finder. He, along with a marine specialist from Boating World, will show boaters how to interface these special electronic components.
John and his crew enclose a transom on this episode and show us all the materials needed to do the job. Also. John investigates marine canvas on another boat as well as demonstrates how we can remove those nasty rust stains.
Back at RPM Diesel Engine Company, John would like to discuss the generators. he will get into the function of the generator and go over terms like wattage, voltage, amperage, cycles, and droop. He we also talk about what generator is right for your boat… and how to maintain them.
John is busy in this half hour of Ship Shape TV creating a boot stripe for one of his Stamos project boat. Then its back on the Bertram Moppy where he is finishing up a gel coat repair by applying primer and finish coats to the vessel. He then switches gears and discusses the art of creating non-skid for a deck.
John is having problems removing the decals off a boat because it is greatly cutting into the gel coat. Well have no fear, John has a solution to this problem as well as many tips for removing those decals off of any boat. He also has a solution for the ghosting that is associated with removing old decals. Then he will install a bilge pump on another project boat.
With the mounting advantages of having a bracket on the back of a boat increasing with time, John and Bert install an Armstrong Aluminum engine bracket to the back of their Whitewater project boat. Armstrong Nautical Products, where engine brackets are made, is visited… and those who watch this episode will get an in-depth treat as to how brackets engine brackets are fabricated.
The Taco Marine boat for charity gets completely revitalized from the bottom up in this episode. A new fuel tank is fabricated and installed properly and all wood rot is replaced by new stringers and bulkheads; to ensure that whoever wins this boat will practically have a brand new craft!
Join John Greviskis & Guests as he learns how to protect his naked pilings at his home dock. Next we travel to Canvas Designers to make Designer pillows for the Taco Marine Project Boat for Charity. Then, in this half hour, Jonathan Greviskis learns how to repair a carburetor. And lastly… John gets a lesson in organizing his tackle from BoatOutfitters.com
In this informative episode of Ship shape TV, John and Friends build a floating dock so that John’s wife can easily board her boat.
In this episode of Ship Shape TV, John wants to “Steer You” in the right direction when it comes to hydraulic steering. Rather than buying a new hydraulic system entirely, John enlists a company known for rebuilding systems like new.
Watch the SSTV crew this week take a variety of boats and completely make them over and modernize them! From hatches to the hulls themselves, John and his expert friends in the industry discuss many ways to give your boat its own special look!
In this exciting episode of Ship Shape TV, John and his friends are in Upstate New York refurbishing a windshield on a beautiful Chaparral. Also… John and Matthew Anzardo from Awlgrip teach us how to apply non-skid with a roller. Then.. it’s all about boat safety satellite equipment that could help save everyone in a tough situation!
In Upstate New York, John and Friends replace old fabric on a boat with new manufactured by Ameritex Fabric Systems, a division of Taylor Made Systems. A camper cover is made and you are given a great explanation as to why owning one greatly expands the boating season.
The Taco Marine Charity Boat is back in this exciting episode. This time we visit the guys at BoatOutfitters.com as they completely remodel the interior cabin… giving this old boat a new updated look!
In this episode, John learns several different ways to get away from those cumbersome boat covers and cover your boat with ease. From specially made custom Mooring Covers to simple seat covers… this episode will show you how to bring some fun back to boating, while still protecting your vessel!
Want to update your out of style hardtop? Well in this exciting episode of Ship Shape TV, the Taco Marine Project Charity Boat gets its hardtop completely re-fabricated from scratch. Learn how the Pros design and Weld this important structural piece for your vessel!
The Ultimate Re-Fit contest winner gets some engine work done in this episode… specifically the water pump. Also, the center console gets a makeover that attractively stores the fire extinguisher.
ohn Greviskis visits his son, Jonathan, on the west coast in Seattle, Washington. While there, John and his son discover what makes Seattle such a main force in the boating industry! They take us on a unique tour of the restaurants, industry, and the beauty of the area as well. We also learn a lot about downriggers and go fishing for Salmon.
While attending iCast 2017… John takes this opportunity to talk with Infinity Luxury Woven Vinyl Marine Carpeting and decides it would be an ideal floor covering for the Taco Marine Project Boat!x
In this second grand episode of John’s trip to Seattle, John learns how to go Crabbing. We also take in the sights, sounds, and history of this famous port area as well as eat in some fantastic restaurants.
Emergency! John has discovered that one of his diesel tanks on his 57′ Monterey had been leaking fuel into the bilge all summer! In this episode, John discovers what to do about this fuel leak situation safely and economically. Also… The crew of Ship Shape TV removes a fuel tank that has broken free underneath the deck of another project boat.
John and company install and rigs a new twin set of outboards from Yamaha on the Taco Marine Project Pursuit Boat.
John and his new friends from Lighthouse Marine Supply, teach us how to Maintain easily our stern Drives on a yearly basis… and DIY nonetheless! Also John switches to 18 ft Outrigger poles… covering more ground when it comes to big game fishing on his Sea Vee.
John Greviskis and friends from Siren Marine show us how to install and operate a remote boat monitoring and security system