With the Barra and TH400 mounted in Woody's Crown Wagon it's time to turn our attention to the all important support systems of fuel and electronics. The fuel system is handled by the Raceworks catalogue starting with a surge tank that fits in the available space at the rear of the car. Some custom mounting and modification to the existing fuel tank outlet allows Raceworks 200 series PTFE AN lines and fittings to be used throughout. Up front the Barra is being fed fuel via a Raceworks fuel rail and 1500cc injectors and the pressure is regulated by a GFB FXD AN8 fuel pressure reg. Al then gets stuck into one of his favourite tasks, wiring the ecu. In this case he is wiring both a VCU and PDM in the form of the Haltech Nexus R3 VCU and a Haltech PD16 PDM. This new generation of Haltech products allows much greater flexibility in powering high demand pumps and motors and also control over the engine itself all from the same software interface. Woody also tackles some creature comforts